Category: MESA8
Input parameters
Name
|
Setting
|
Default
|
Optimization range
|
Tune
|
Number>0
|
1
|
0.25-2
|
Delta
|
Number>0
|
0.2
|
0.05-0.5
|
Price
|
Input time series
|
Close
|
|
Description
The Cycle indicator contains all cyclic frequency components whereas the Bandpass indicator contains only the dominant cycle. If the difference between them is small, then most of the cyclic energy in the data is concentrated at the dominant cycle. If the difference between them is relatively large, then there is cyclic energy in the data at frequencies other than that of the dominant cycle. The Quality indicator measures the average power difference over the last dominant cycle period between these two other indicators and displays this difference in decibels relative to 0.1%. The Tune parameter adjusts the dominant cycle period relative to its measured value. The Delta parameter is the bandwidth of a bandpass filter in terms of +/- percent of the center period. A smaller number gives a narrower bandwidth to eliminate extraneous cycle components and a larger number give a wider bandwidth to improve responsiveness to transients.
|